No Image

Learning CAD

3rd February 2019 mangojellylab 0

I have been spending a few evenings with the FreeCAD manual working through the tutorials which I have been enjoying (especially the Lego brick tutorial […]

No Image

Macros

6th January 2019 mangojellylab 0

I cut another row of two holes into the waste-board. I was aware that until I replaced the motor coupler in the z-axis there was […]

No Image

First Cut!

3rd January 2019 mangojellylab 0

I made the first cuts with the CNC machine! This was in the form of two lines of holes 50mm apart on the pasteboard. Two […]