Just the straight forward task of drilling the wooden blocks that attach to the acrylic uprights which will anchor the whole of the x-axis to the gantry base. This left me with wooden blocks with holes in the bottom and side that attach to the acrylic uprights and the MDF base. The holes were drilled in the x-axis uprights slightly bigger to allow for fine adjustment aligning the axis with the gantry base. I finished the day by removing the old side pieces from the current build and putting them back into the recycling pile for use on another project (currently clearing the Sky Q from the surface that its perched on to increase air circulation stopping the fan from kicking in and sounding like a tormented cat!) .